The Videofied™ Outdoor P-CAM Model DC V750 is a battery operated, wireless outdoor motion activated camera designed for use in the Videofied™ security systems. Motion-activated cameras are intended for applications where video verification of intrusion alarms is necessary or desired.
The DC V750 consists of a digital camera, a passive infrared motion detector, and S2 VIE W spread spectrum, videofied interactive, encrypted wireless cicuitry for secure two way communications with the control panel.
The camera consists of a CMOS black and white sensor and an 85 degree, wide angle lens. Two infrared LED s provide a night illumination distance of approximately 40 feet/12 meters. For motion or movement detection, a Fresnel lens inside the cover captures a 40 foot wide, 90 degree angle passive infrared pattern.
The base allows for gimble arm mounting and waterproof casing. A tamper function provides cover tamper detection. The camera is typically installed to cover outdoor applications where there is a temperature fluctuation and areas where broad viewing/detection coverage is needed. When the alarm system is armed and the motion detector senses motion or movement, the detector transmits a signal and activates the camera, which captures a 10 second digital video segment. The control panel recieves the signal and responds according to system configuration/programming.
The alarm and video segment are reported via the control panel to the central monitoring station, and can also be sent to an Email address for viewing.
The detector is powered by three lithium batteries that can last four years or more, depending on the amount of detector activity.
The detector transmits a check-in signal every eight minutes that includes its unique identification code along with the current detection sensor state, tamper condition, serial number, date of manufacture,software revision, and battery status.
> S2View® — Spread Spectrum, Videofied, Interactive
AE S Encrypted Wireless technology provides optimum
signal integrity and security.
> Camera- CMOS black and white sensor with 85 degree wide angle
lens and video resolution of 320 x 240 pixels.
> Supervised—transmits a check-in/status signal every
8 minutes indicating tamper state and battery status.
> Tamper- Provides cover tamper detection.
> Lithium batteries- last four years
> Night illumination- up to 40 feet/8 meters distance using two
infrared LED s
> Motion detector- Dual-element, passive infrared with Fresnel lens
for 40 ft./12m wide 90 degree coverage.
> Camera begins filming in fewer than 100 milliseconds after the PIR
> Camera is fully waterproof and can withstand temperatures from
-20 degrees to 140 F (-30 – +60 C).
> Outdoor video verification of intrusion alarms